General Navigation And Commerce Company (GENAVCO) L.L.C
-C14---C30.jpg)
Portable Compressors (C-Series) C14 - C30 Range
A wide range of “single tool” compressors match exactly your air requirements. The smallest is the C14, a compact manually transportable Honda petrol engined screw
compressor to load into a van. This provides 1.4 m3/min. of air at a rated pressure of 7 bar g. Next is the C20 portable, powered by a Kubota D1105 water cooled diesel, and providing 2m3/min. of air at 7 bar g.
If more air is required for extra hand tools or to power a pneumatic pump to drain a trench, chose the C25 powered by the Kubota D1105 pump to drain a trench, chose the C25 powered by the Kubota D1105 and offering 2.5 m3/min. at 7 bar g. Versatility of the single tooler range
is increased by provision of generator models for site lighting, electrical tools or fusion welding of polyethylene service pipe.
The C20GS - includes an electrical generator which can be run at the same time as the compressor providing air at 2.0 m3/min, the C30 is powered by the same Kubota V 1505 engine as the C20GS and provides air at 3.0 m3/min
Product Rage in Portable C14 - C30 Range
- C14
- C20
- C25
- C20GS
- C30
GREEN POWER
A wide range of “single tool” compressors match exactly your air requirements. The smallest is the C14, a compact manually transportable Honda petrol engined screw
compressor to load into a van. This provides 1.4 m3/min. of air at a rated pressure of 7 bar g. Next is the C20 portable, powered by a Kubota D1105 water cooled diesel, and providing 2m3/min. of air at 7 bar g.
If more air is required for extra hand tools or to power a pneumatic pump to drain a trench, chose the C25 powered by the Kubota D1105 pump to drain a trench, chose the C25 powered by the Kubota D1105 and offering 2.5 m3/min. at 7 bar g. Versatility of the single tooler range
is increased by provision of generator models for site lighting, electrical tools or fusion welding of polyethylene service pipe.
The C20GS - includes an electrical generator which can be run at the same time as the compressor providing air at 2.0 m3/min, the C30 is powered by the same Kubota V 1505 engine as the C20GS and provides air at 3.0 m3/min
BOGE
A wide range of “single tool” compressors match exactly your air requirements. The smallest is the C14, a compact manually transportable Honda petrol engined screw
compressor to load into a van. This provides 1.4 m3/min. of air at a rated pressure of 7 bar g. Next is the C20 portable, powered by a Kubota D1105 water cooled diesel, and providing 2m3/min. of air at 7 bar g.
If more air is required for extra hand tools or to power a pneumatic pump to drain a trench, chose the C25 powered by the Kubota D1105 pump to drain a trench, chose the C25 powered by the Kubota D1105 and offering 2.5 m3/min. at 7 bar g. Versatility of the single tooler range
is increased by provision of generator models for site lighting, electrical tools or fusion welding of polyethylene service pipe.
The C20GS - includes an electrical generator which can be run at the same time as the compressor providing air at 2.0 m3/min, the C30 is powered by the same Kubota V 1505 engine as the C20GS and provides air at 3.0 m3/min
ALLISON
A wide range of “single tool” compressors match exactly your air requirements. The smallest is the C14, a compact manually transportable Honda petrol engined screw
compressor to load into a van. This provides 1.4 m3/min. of air at a rated pressure of 7 bar g. Next is the C20 portable, powered by a Kubota D1105 water cooled diesel, and providing 2m3/min. of air at 7 bar g.
If more air is required for extra hand tools or to power a pneumatic pump to drain a trench, chose the C25 powered by the Kubota D1105 pump to drain a trench, chose the C25 powered by the Kubota D1105 and offering 2.5 m3/min. at 7 bar g. Versatility of the single tooler range
is increased by provision of generator models for site lighting, electrical tools or fusion welding of polyethylene service pipe.
The C20GS - includes an electrical generator which can be run at the same time as the compressor providing air at 2.0 m3/min, the C30 is powered by the same Kubota V 1505 engine as the C20GS and provides air at 3.0 m3/min
MTU
A wide range of “single tool” compressors match exactly your air requirements. The smallest is the C14, a compact manually transportable Honda petrol engined screw
compressor to load into a van. This provides 1.4 m3/min. of air at a rated pressure of 7 bar g. Next is the C20 portable, powered by a Kubota D1105 water cooled diesel, and providing 2m3/min. of air at 7 bar g.
If more air is required for extra hand tools or to power a pneumatic pump to drain a trench, chose the C25 powered by the Kubota D1105 pump to drain a trench, chose the C25 powered by the Kubota D1105 and offering 2.5 m3/min. at 7 bar g. Versatility of the single tooler range
is increased by provision of generator models for site lighting, electrical tools or fusion welding of polyethylene service pipe.
The C20GS - includes an electrical generator which can be run at the same time as the compressor providing air at 2.0 m3/min, the C30 is powered by the same Kubota V 1505 engine as the C20GS and provides air at 3.0 m3/min
JOHN DEERE Power System
A wide range of “single tool” compressors match exactly your air requirements. The smallest is the C14, a compact manually transportable Honda petrol engined screw
compressor to load into a van. This provides 1.4 m3/min. of air at a rated pressure of 7 bar g. Next is the C20 portable, powered by a Kubota D1105 water cooled diesel, and providing 2m3/min. of air at 7 bar g.
If more air is required for extra hand tools or to power a pneumatic pump to drain a trench, chose the C25 powered by the Kubota D1105 pump to drain a trench, chose the C25 powered by the Kubota D1105 and offering 2.5 m3/min. at 7 bar g. Versatility of the single tooler range
is increased by provision of generator models for site lighting, electrical tools or fusion welding of polyethylene service pipe.
The C20GS - includes an electrical generator which can be run at the same time as the compressor providing air at 2.0 m3/min, the C30 is powered by the same Kubota V 1505 engine as the C20GS and provides air at 3.0 m3/min
ISUZU Marine
A wide range of “single tool” compressors match exactly your air requirements. The smallest is the C14, a compact manually transportable Honda petrol engined screw
compressor to load into a van. This provides 1.4 m3/min. of air at a rated pressure of 7 bar g. Next is the C20 portable, powered by a Kubota D1105 water cooled diesel, and providing 2m3/min. of air at 7 bar g.
If more air is required for extra hand tools or to power a pneumatic pump to drain a trench, chose the C25 powered by the Kubota D1105 pump to drain a trench, chose the C25 powered by the Kubota D1105 and offering 2.5 m3/min. at 7 bar g. Versatility of the single tooler range
is increased by provision of generator models for site lighting, electrical tools or fusion welding of polyethylene service pipe.
The C20GS - includes an electrical generator which can be run at the same time as the compressor providing air at 2.0 m3/min, the C30 is powered by the same Kubota V 1505 engine as the C20GS and provides air at 3.0 m3/min
CompAir
A wide range of “single tool” compressors match exactly your air requirements. The smallest is the C14, a compact manually transportable Honda petrol engined screw
compressor to load into a van. This provides 1.4 m3/min. of air at a rated pressure of 7 bar g. Next is the C20 portable, powered by a Kubota D1105 water cooled diesel, and providing 2m3/min. of air at 7 bar g.
If more air is required for extra hand tools or to power a pneumatic pump to drain a trench, chose the C25 powered by the Kubota D1105 pump to drain a trench, chose the C25 powered by the Kubota D1105 and offering 2.5 m3/min. at 7 bar g. Versatility of the single tooler range
is increased by provision of generator models for site lighting, electrical tools or fusion welding of polyethylene service pipe.
The C20GS - includes an electrical generator which can be run at the same time as the compressor providing air at 2.0 m3/min, the C30 is powered by the same Kubota V 1505 engine as the C20GS and provides air at 3.0 m3/min
Product Rage in Portable C14 - C30 Range
- C14
- C20
- C25
- C20GS
- C30